DevHook v0.45 Released Added MOD

DevHook v0.45 MOD (USB + Svreenshot) 가 릴리즈 되었습니다.

By Booster, DevHook updated to v0.45- Launching PSP Homebrew on emulated 2.71 FW now possible! This pack contains the required 2.71 FW files and Mods listed below!

Changelog:

– Support for loading EBOOT.PBP on memory stick and EBOOT.BIN on UMD (iSO) in ELF format.
– Fixed problems that made 1.50 NoUMD not functioning.
– Added more exclusive controls added to flash emulation. As well as other memory stick breaking countermeasures.
– Memory map changed for rebooting.

To-Do:

– FW2.71 registry initialization failure problem.
– Stabilize flash emulation (file access).
– NoUMD for FW 2.xx
– NAND driver level emulation

Notes:

– You will need to edit the SFO file that’s in the sdk folder in order to make your homebrew compatible. For instructions on how to convert your hombrew load the “homebrew on 2.xx+devhook” EBOOT in the emulated fw.

– To install, just copy over the previous DevHook v0.44 FULL package and press yes to overwrite.

– For NoAutoRun, in hex 2390 change F8 FF to 00 00.

– It still appears to freeze with 333 MHz, the 2.0 wlan.prx didn’t fix the 333 MHz boot problem on 44 or 45.. it just allows to run the WiFi at 333mhz and burn it out.

– 1.5 Flash Mode seems to work back fully again in v0.45: no need for additional loadexec.prx, only the 1.5 reboot.bin from the 1.5 dump to dh\150F. RunUMD also seems to work well. Hitchhikr’s ‘Kernel Mode Under Firmware 2.6’ does NOT work though.

Mods Included:

– USB (by TheBuzzer)
– ScreenShot Mod

All I did was replace a few files, didn’t recompile it or anything but it works. I also edited EBOOT.PBP with a hex editor so it now reads DevHook v0.45 instead of v0.44.

1) ok 1st off back-up your save data if any.

2) then format your MemoryStick and extract all files to the root directory of your MemoryStick and thats pretty much it!

You now have 2.xx homebrew working through DevHook with ScreenShot and USB Mods fully working. Thanks goes to Dark_AleX and TheBuzzer.

포스트를 참조하세요. → 현재창 / 새창
(왜인지 모르겠지만 풀버젼만 있는 관계로…)
바꿔볼까요~
일단 위의 내용을 확인하시고 사용하시기 바라며
프로그램 사용시 문제가 생길 수도 있습니다.
이 책임은 사용자 본인에게 있음을 다시 한번 말씀드립니다.

오늘 Booster가 PSP Device Hook Sample Launcher v0.45를 내 놓았습니다.

PSP Device Hook Sample Launcher v0.45
By BOOSTER

DevHook updated to v0.45- Launching PSP Homebrew on emulated 2.71 FW now possible!

Changelog:

– Support for loading EBOOT.PBP on memory stick and EBOOT.BIN on UMD (iSO) in ELF format.
– Fixed problems that made 1.50 NoUMD not functioning.
– Added more exclusive controls added to flash emulation. As well as other memory stick breaking countermeasures.
– Memory map changed for rebooting.

To-Do:

– FW2.71 registry initialization failure problem.
– Stabilize flash emulation (file access).
– NoUMD for FW 2.xx
– NAND driver level emulation

Notes:

– You will need to edit the SFO file that’s in the sdk folder in order to make your homebrew compatible. For instructions on how to convert your hombrew load the “homebrew on 2.xx+devhook” EBOOT in the emulated fw.

– To install, just copy over the previous DevHook v0.44 FULL package and press yes to overwrite.

– For NoAutoRun, in hex 2390 change F8 FF to 00 00.

– It still appears to freeze with 333 MHz, the 2.0 wlan.prx didn’t fix the 333 MHz boot problem on 44 or 45.. it just allows to run the WiFi at 333mhz and burn it out.

– 1.5 Flash Mode seems to work back fully again in v0.45: no need for additional loadexec.prx, only the 1.5 reboot.bin from the 1.5 dump to dh\150F. RunUMD also seems to work well.  Hitchhikr’s ‘Kernel Mode Under Firmware 2.6’ does NOT work though.

결국은 나와주는군요.

2.XX 상태에서 Homebrew 를 실행할 수 있게 만드려고 하나봅니다.
(SFO라는 프로그램으로 변환 후 실행할 수 있다고…)
그리고 안정성 향상을 위해 계속 노력하고 있는 듯합니다.
333MHz에서 WiFi가 안정적으로 작동한다고 합니다.

설치는 0.44에 덮어쓰라고 되어있습니다.

Need something new

전 새로운 것을 좋아합니다. 하지만 이런 경우엔 안정적인게 좋겠군요.
조금만 기다리면 포스트를 수정(추가)하고 있겠지요…

기다려 봅시다

이 사이트는 광고를 포함하고 있습니다.
광고로 발생한 수익금은 서버 유지 관리에 사용되고 있습니다.

This site contains advertisements.
Revenue generated by the ad servers are being used for maintenance.